11 Measures to Spray Paint Your Car Like the Professionals - Auto Bodywork Paint Repair - hospitablepuppe96's Blog

hospitablepuppe96

hospitablepuppe96

11 Measures to Spray Paint Your Car Like the Professionals - Auto Bodywork Paint Repair

Posted

You'll be surprised to see only how you can spray on car paint actually can be easy. That does not mean that you go at it and can only grab a tin of paint. There are some fundamentals you should know. Both in the preparation and application.

Step A:

Prepare by gathering all your things that you are going to need. Make certain your surrounding area is protected against any possible over aerosol. Any parts that do not need to be sprayed and that can be removed then do so.

Measure B:



You may need to examine the car carefully for any rough spots. These will have to be sanded with 300 grit sand paper. This will smooth out the rough spots. Additionally, it allows the aerosol auto paint to adhere better. Be sure all the dust dirt and debris are removed from the vehicle once you've finished sanding. It is imperative the automobile be absolutely clean.

Step C:

This will make sure that you get an overall even coating of your colored paint plus helps the paint to stick well. Make sure you allow for drying in between and apply light layers when you spray the primer. How exactly to spray auto paint requires a little getting used to.

Step D:

Now you are pretty well to the point at which you're around ready to spray the color. You may have determined to Alloy Wheel Repair Hornchurch use the spray car paint that comes in aerosol cans, or perhaps you might have opted for the spray gun. In either case, make a couple of practice strokes on an object before you start with the auto. After you might be ready, start the passes with the paint without reluctance. If you hold gun or the spray can in one place, you will end up getting uneven coverage and potentially the paint will run. Should this happen you've got a significant repair job on your had. You'll most likely have instructions as to the best way to spray on car paint using the equipment or spray cans.

Step E:

It is up to you whether you want to wet sand between coats of colour and primer paints. Check with someone that is familiar with just how to spray car paint, or you might want to research this alternative on the web

Step F:

You're down to the finishing touches once you happen to be absolutely satisfied with the color. You may now want to apply several coats that are clear. This can give the polish and finished appearance to the car as well as protect the finish. It will be up to you personally although likely two coats will be adequate. Make absolutely sure it's dry in between coats.

Step G:

Once more, you've got the alternative of wet sanding if you favor. Again, I will suggest you ask the advice of individuals that are comfortable with how to spray paint an automobile. You need to wet sand with these grits in this order if you determine to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that may be overly heavy in the clear coat application.

Step H:

Step I:

You should now buff the surface. To try this just use a moderate cut polish. You should have a perfect glassy look to the finish once you have done this.

Step J:

As a final touch, you may want to apply a couple of coats of wax.

Comments (0)

Add Comment
Comments Options
Sort comments by:





blog archive


get in touch

You must login or register in order to get in touch.